Change log VOIspeed 4 VOIspeed v4.8.1 - Added on IP Client: new setup with call management version 4.6.41 - fixed on IP Client: Sometime call pick doesn’t work version 4.6.39 - fixed on PBX: a call block when refused and a new carrier is tried. If fax, block the sending queue (900) - fixed on PBX: wave file untimely cut off when recording call through service.cgi (902) - fixed on IP client: Using IP client with Polycom phone hangs the server (914) - fixed on client: Sometime a phantom mouse click cause unwanted actions (915) - fixed on server: refused calls from SIP carrier are not managed, causing fax block (900) - fixed on server: wave file untimely cut off when recording call through service (902) version 4.6.37 Voispeed - fixed: volumes on V-6014 phones running on Windows XP version 4.6.34 Voispeed - added on client: support for Polycom USB phone - fixed on server: when a user device rejects call, other user's tandem device is disconnected version 4.6.30 Voispeed - fixed on server: divert call doesn't work fine if diverting user is logged off (898) - fixed on server: sometimes global monitoring shows parked call info even if a call is not parked - added on IP client: support for all IP phones version 4.6.29 Voispeed - added on client: Plantronics Savi W440 and Voispeed USB V-6012 support and compatibility - added on server: on incoming VOIP call, PBX searches for carrier using source IP and called number (894) - fixed on server: existing installation can be upgraded even with expired licence, eventually causing PBX lock. - fixed on server: when a user logs out, PBX disconnects all calls parked by him (891) - fixed on server: admin capability for editing IVR doesn't work properly (892) - fixed on server: when pbx records outgoing calls the wave file name syntax is wrong (893) - fixed on server: sometimes pbx crashes when using http audio streaming (896) - fixed on server: ISDN busy tone doesn't travel through WAN link if remote calling interface is ISDN (897) - fixed on client: login failure after user password change (895) version 4.6.26 Voispeed - fixed on server: Internal calls to SIP phones may not ring when no department set (890) version 4.6.26 Beta (Client only) - Added on client: support for Plantronics Spokes Software - Added on client: support for V-6012 Headset button Versione 4.6.25 - fixed on server: characters "<" and ">" are not correctly encoded in html pages (886) - fixed on server: if two or more administrator are connected to pbx monitoring, a ini file backup is created every second (887) - fixed on server: when making calls via services.cgi and first number uses LCR, carriers are not correctly sorted (888) - fixed on server: when using automatic call recording disconnect fails due to system exception (889) - fixed on client: when administrator changes service number, user cannot call group voicemail from client until PBX is reeboted Version 4.6.23 voispeed - added on server: extension number in wave filename of recorded calls - fixed on server: blank page when editing IVR on the last day of the month - fixed on server: blank page on call report on the first day of the month - fixed on client: blank page when scheduling IVR closing on the last day of the month - fixed on client: blank page on dialled/received calls on the first day of the month Version 4.6.22 Voispeed - added on server: more selection fields on received and sent faxes page - added on server: possibility to choose time when scheduling IVR closing - added on server: IVR closing manager - added on client: IVR closing interface (in voice mail panel) - fixed on server: fax reschedule, fax delete, fax send notify, when sending to many recipients - fixed on server: failure when many users divert call to external party number in a group with progressive ringing mode (882) - fixed on server: random failure when on IVR node error the call is forwarded to anothr IVR node (883) - fixed on server: administrator can download DB files even without capability (879) - fixed on server: administrator can edit configuration files even without capability (880) - fixed on server: administrator can change LCR routing rules even without capability (881) - fixed on server: wrong ring time information in callreport when called party refuses the call (870) - fixed on server: no audio free tone when a single user diverts the call (871) - fixed on server: wrong carrier information in callreport for not accepted calls (874) - fixed on server: failure when IVR transfers call to an ureachable group, using script (875) - fixed on server: Enable fax tone detection option in SIP carrier configuration not correctly saved (876) - fixed on client: wrong context in user popup while system users panel updates (872) - fixed on client: client doesn't save crohnology file, so auto completion doesn't work with all called numbers since 4.6.16 installation (877) - fixed on client: access violation error when client starts in extended mode (878) - fixed on client: "Enter" doesn't answer incoming call - fixed on IP client: FAX document download broken (873) Version 4.6.16 VOIspeed - added on server: audio recording service for system messages - added on server: total call duration information in call report - added on server: user departments management - added on client: new user status panel ("All users") added on client. Users list automatically organized in Routes and Departments (two level tree). - fixed on server: admin and super-admin password update through web-admin interface fails (863) - fixed on server: SIP network interface configuration is not saved properly (864) - fixed on server: ring time not set (on the statistics) when called close the call (870) - fixed on client: the client application is closed and restarted, clicking on the application icon (866) - fixed on client: link to Advanced Configuration not working after a fresh installation (868) Version 4.6.9 Platform - add on server: PBX can be set in maintenance mode (all incoming calls will be rejected) in order to obtain as soon as possible an idle status to apply some settings. - fixed: correct localized language displayed on pre-installed multi-language OS - fixed on ip client: on double click on systray icon, ip client shows ever authentication form (858) - fixed on server: pick call not allowed when picking user is already into ringing group (857) - fixed on server: divert to external number failure on calls to groups with just one user inside (855) - fixed on server: error on children nodes level when editing IVR tree (854) - fixed on server: conference or meeting room members continue to hear disconnect tone after ISDN member exit (851-852-853) - fixed on server: no delivery text messages to V-6015 (850) - fixed on server: loosing of partial user sharing configuration over wan route when a new wan route setting is applied (848) - fixed on server: wrong busy signal processing from tandem device (849) - fixed on client: first run configurations are lost if user is not administrator (862) - fixed on client: icons and ringings files copied by setup on administrator's folder, not accessible to normal user (861) - fixed on client: change password procedure (860) Version 4.6.7 Platform - add on server: new service number for loopback audio - add on server: improved call report: calls are grouped if they are part of the same call trace when there are call transfers - add on server: download of call recording wave file in call report - add on server: extended information in call export format - add on fax client: user contacts sorting - add on client: new Integra "voispeed:" commands to login\logout user from an external application - fixed on fax client: installation issues causing malfunction during fax sending (843) - fixed on server: wrong call report details after conference - fixed on server: when a user with tandem devices is called when busy, calling doesn't hear busy tone. Version 4.6.4 Platform (BETA) - add on client: dialed number completion (only based on last 1000 numbers) - add on client: each user can insert his "status phrase" that will be notified to all other clients - add on client: new notify icons above dial box for events: lost call, lost message, voice mail message and call quality realtime monitor. - add on client: info about interface, wan route or carrier involved in the current call. - add on server: partial users sharing on WAN routes - add on server: "hidden user" setting introduced in user profile - add on server: improved call diverting service: routing algorithm will be fully applied to routing call to destination number, so is now possible to divert a call to a group. - add on fax client: multiple documents sending in the same fax, even from different applications - add on fax client: fax recipients from local PBX phonebook - add on fax client: automatic fax sending managed by an instructions file - add on fax client: augmented number of fax recipients up to 10000 for each sending Version 4.5.20 - fixed on server: wrong original calling/called party in call report after a calla transfer - fixed on server: wrong 'called' and 'xfer_id' parameters in ANS event 8 (call transfer) - fixed on server: LCR is not applied during services.cgi calls on first interface - fixed on server: when someone is transferred to a meeting room, the call is disconnected if there are two or more peaople in the meeting room - fixed on server: unexcepted call disconnects when there are many remote clients - fixed on server: sometimes hung calls appear on monitoring when queued calls are disconnected - fixed on client: wrong display information after call transfer - fixed on client: wrong items on Outlook context menu - added on server: proxy server settings can be ignored when using ANS Version 4.5.18 - fixed on server: when a second position or more group member accepts an incoming call, calling hears nothing (845) - fixed on server: when an user in tandem configuration, reject a call because is busy, calling party doen't hear busy tone (844) Version 4.5.16 - fixed on server: wrong error message on ringing group number duplicated (833) - fixed on server: PBX doesn't create administrator access report file "LogAccess.txt" (835) - fixed on server: PBX rises a system exception everytime a shared WAN user is called as member of an ACD ringing group (836) - fixed on server: wrong logged users number shown in group activity monitor, after group members changing (837) - fixed on server: if IVR try to transfer a call to an unreacheable number, call transfer to default failure number doesn't start (838) - fixed on client: internal ringing changing not saved after client reboot. (832) - fixed on client: if a second call rings at client in the meanwhile a previous call is still ringing, the first one stops to play the ringing audio file (only if "Wave ring enabled" option is not selected)(840) Version 4.5.14 - fixed on server: a logged off user, member of a ringing group, doesn't begin to ring if it logs in while the group is ringing. (828) - fixed on server: the PBX stops working during service command #7 execution. (829) - fixed on server: in a call involving a member of a ringing group configured to make polls, the poll starts also if the external number is the first to hangs up. (826) - fixed on server: in a ISDN call managed by IVR, DTMF decoding doesn't work after a call transferring to remote IVR via WAN route. - added on server: fixed length parameters passing to Blue's Professional Version 4.5.13 Platform - fixed on server: problem during call intrusion when one of the intruded party put the call on and hold (816) Version 4.5.12 Platform - fixed on server: backed up ini files can fill hard disk space when two administrators look at the monitoring (812) - fixed on server: wrong stop routing algorithm on busy (813) - fixed on server: SIP phones couldn't resolve number to name (814) - fixed on client: during conference, after closing a call (external to conference), conference window closes (811) Version 4.5.10 Platform - fixed on server: updating from v4.4.x to v4.5.x voice and fax client desktop icon are lost (797) - fixed on server: forwarded received call not listed in call lists (799) - fixed on server: sending multiple faxes failed when using many fax lines (804) - fixed on client: if winfax.dll is missing fax client won't start (800) - fixed on client: client upgrade fails if PBX HTTP port changed from default 3541 (792) - fixed on client: calling with IP client using hotline, off hooking handset, 996 is shown on call lists (805) - fixed on client: on IP client's users tab, "Extension" section, call won't start clicking on menu icon (806) Version 4.5.8 Platform - fixed on server: random system lock using tandem users, priority ringing and single-user groups (795) - fixed on client: client upgrade fails if PBX HTTP port changed from default 3541 (792) Version 4.5.6 BETA Platform - fixed on server: on groups, a problem with action "Play Message" when ringing end (790) - fixed on server: on some Telco interfaces, using Direct Dial In, calls have an empty calling and ignored (789) - fixed on server: missing intrusion button on user area (787) - fixed on client: local user or wan user calls have no name resolved (785) - fixed on server: new fax library isdnfx32.dll missing (778) - fixed on server: on some PCs, PBX is very slow due to some initialization funcions (779) - fixed on server: sending an SMS from SIP phone to a switched-off client continues until client power on (781) - fixed on server: on some PCs, there is a problem with the DB engine (784) Version 4.5.1 BETA Platform - fixed on client: ringing fail to start on internal calls (752) - fixed on client: number dialing area too small (753) - fixed on client: on contact items, clicking right button, group options are erroneously displayed (755) - fixed on client: on client auto-update internal number ringing not updated (757) - fixed on client: during a vocal box session, listening to message, using command * (delete message) make the call close (763) Version 4.4.18 Platform - added on server: improved anti-DoS security Version 4.4.15 Platform - fixed on server: on some machines, pbx slow down when listening to vocal box (783) - fixed on fax: FAX client crash when printing big documents (774) - fixed on server: wrong result when sending an SMS to a logged off user using services.cgi (771) - fixed on server: single ringing when forwarding a call to a group that has users deflecting to each other (772) - fixed on server: WAN is not working if IP addresses for LAN and WAN interfaces are different (777) - fixed on server: no dial tone until answer calling through IPKom carrier (770) - fixed on server: Voicetrading carrier changed SSL version so we are unable to send sms through it (769) - fixed on server: exit number to Direct Dial In not correctly shown (768) - fixed on client: special characters in fax recipient name cause fax client errors (765) Version 4.4.12 Platform - fixed on server: fax tone "X" not automatically detected (747) - fixed on server: problem when creating a meeting room from services.cgi (759) - fixed on server: call recording file naming error after IVR call transfer (762) - fixed on server: pbx freeze after many remote client calls (764) - fixed on IP client: dialed numbers not get cleaned of not allowed characters (750) Version 4.4.10 Platform - fixed on server: a user login but can't get a call queued for his group (742) - fixed on server: sometime a DTMF is played twice during early connect phase (744) - fixed on server: a call from hardware PBX could have no caller ID, should be "missing" ID (745) - fixed on server: ANS's "playback end" event sometime is empty (697) - fixed on server: some empty fields on monitoring (698) - fixed on server: some meeting rooms are not usable after deleting one of the others (703) - fixed on server: some calls for a group with Talk duration Time enabled are missing on call report (726) - fixed on server: on the user capabilities there are a lot of unused white checkboxes (738) - fixed on server: bad behaviour changing user mode using service number (739) - added on server: intrusion button on user area - added on client: option to delete all text messages - fixed on client: wrong manual link (724) - fixed on client: some missing icons (725) - fixed on client: after creating/moving/deleting a user group, other groups' tab captions are wrong (736) Version 4.4.7 BETA Platform - fixed on server: missing parameter on ANS "Playback end" event (697) - fixed on server: missing monitoring information on conference calls (698) - fixed on server: Issue with meeting room deletion (703) Version 4.4.4 BETA Platform - fixed on server: on SIP user area, meeting room tab, wrong Action button (673) - fixed on server: missing meeting room icon (674) - fixed on server: changing IVR settings lead to "bad post parameters" error (675) - fixed on server: remote access support application installed on a wrong path (676) - fixed on server: clients auto-update feature not working (677) - fixed on server: its not possible to set audio files on any users group events (680) - fixed on server: missing "playback end" ANS event when IVR finished playing after a services.cgi request (683) - fixed on client: making a call using the soft client in tandem with a SIP device, call starts from the SIP device (679) - fixed on server/client: 4.3.16 version fixes included Version 4.3.26 Platform - added on server: polish translation - fixed on server: some invalid call are shown on the intrusion call list (740) Version 4.3.24 Platform - added on client: support to V-6014 with firmware relase > 1.3.2.1 - fixed on client: memory leakage on USBphonelcd.dll (737) Version 4.3.23 Platform - fixed on server: after wave audio conversion, no file created (732) - fixed on server: SIP carrier problem when PBX get isolated from network, current calls never end (733) - fixed on server: calling an offline user in vocalbox mode through an IVR, user's vocalbox menu is played (734) Version 4.3.22 Platform - fixed on server: when a SIP call starts, if the TO field contains the word "tag" the call is refused (719) - fixed on server: no voice message feedback after changing IVR mode (only in italian version) (727) - fixed on server: in a group of user X,Y,Z,K, set Z to voice mode, if user X or Y is deleted, Z voice setting is lost (729) - fixed on client: after multiple call forwarding, displayed informations could be wrong (723) Version 4.3.20 Platform - added on client: compatibility with new V-6014 - fixed on client: distorted audio after first call on hold (715) - fixed on client: speed button icon size and position not saved (716) - fixed on client: compatibility issue with Win2K (717) - fixed on client: missing quick launch icon after installation (718) - fixed on client: enhanced V6014 driver detection in case of heavy CPU load - fixed on client: right clicking on the parked calls tab, wrong menu shown (701) - fixed on server: on group progressive ringing, call stops if first member is unreacheable (693) - fixed on server: Contact field on the 200 OK SIP message truncated to first 20 chars (695) - fixed on server: using extended mode DDI, G164 suppression doesn't work (696) - fixed on server: users created by the wizard have "codec PCMU" and "multicell DECT device" options always enabled (699) - fixed on server: parking more than one call, only the first can be resumed (700) - fixed on server: a call is forwarded from a IVR node to a group with progressive ringing and the first member is already ringing, forwarding fails (705) - fixed on server: upgrading from 25 to 50 users license, all users are duplicated, until reboot (706) - fixed on server: a problem blind-forwarding a call to a group with operator-wait message (707) - fixed on server: error while editing a group when some radio button are not checked (708) Version 4.3.16 Platform - fixed on server: received call number wrong on ACD user info (687) - fixed on server: no DTMF tones sent to no-toll number calls (690) - fixed on client: fixed french translation (691) - fixed on client: number display cuts some digits (688) - fixed on client: users group tabs cut some characters (689) Version 4.3.14 Platform - fixed on client: voispeed:a doesn't retrieve a call on wait - fixed on server: changing user mode with no permission lead to error - fixed on server: "extension" field limited to 6 chars - fixed on client: least deflection time must be 5 seconds - fixed on client: when planning an action on client, can't go over December 2008 - fixed on client: a problem with Forward mode button - fixed on client: after a remote client log out, then logs in again, its icon remains grayed - fixed on server: a group with progressive ring and an action on unreacheable. When all users are off the action is not taken - fixed on client: blind forward on a not answered call Version 4.2.21 Pronto - fixed on server: TWT SIP carrier compatibility Version 4.2.20 Pronto - fixed on server: TWT SIP carrier compatibility - fixed on fax : FAX page on landscape (horizontal) format looks squashed (please re-install from setup to fix this) - added on client: Vista 64 bit client compatibility Version 4.3.11 Platform - fixed on server: group voice mail messages delivery - fixed on server: an incoming call from a SIP carrier is deflected by a ringing user to another SIP carrier sometime doesn't work - fixed on server: integration configuration always possible to Administrator even if Super-Administrator unsets permissions - fixed on client: text message is sent even when close icon (X) is pressed - fixed on client: parking two calls to the same number, only one can be retrieved Version 4.3.10 Platform - fixed on server: timeout on call between a SIP user and other user using services.cgi - fixed on server: call forwarding using services.cgi fails if one call is busy and the other in early connect or in web call - fixed on server: routing a call to a WAN carrier, a static WAN route is taken and not the carrier - fixed on server: a group with 2 local user and 2 remote users thru wan routes rings. If one remote user is unreachable, the other remote user stops ringing in a moment - fixed on server: when a IVR node is configured with user input with timeout in the next node the audio message get truncated and call gets forwarded to default number - fixed on server: when a system have more than 200 users, user status notify to SIP phones lead to a bad memory write over reserved memory Version 4.3.9 Platform - fixed on server: call picking using SIP device not working - fixed on server: calling a group where a user is diverted to another user from same group causes a premature call termination - fixed on server: missing call-id info on oncallclose Integra event - fixed on server: enabling LCR load sharing option lead, in some cases, to wrong call routing - fixed on client: when exporting old phonebook contacts, the custom number is missing - fixed on client: both tandem-user devices are ringing, rejecting call from one, the other still rings - fixed on client: settings about sms sending are lost on reboot - fixed on client: missing call parking icon - fixed on client: contacts group tabs caption cut - fixed on client: on Win64 the pause button is misplaced - added on server: better call report filtering, multiple conditions are ANDed Version 4.3.8 Platform - fixed on server: new SIP carriers have outgoing calls limited to 0, needing to be edited - fixed on server: audio messages used during call parking are missing, so user doesn't know what is happening - fixed on client: SIP calls won't dial, if the number contains the service number - fixed on client: anonymized calls (starting with -) always use ISDN Version 4.3.7 Platform - added on server: user statistics showing many informations about calls, timings, etc. - added on server: SMS sending to normal mobile phones (limitations can be applied for each user) (only with selected carriers, like Voicetrading) - added on server: SMS sending to notify when a new vocal box message is received - added on server: SMS monitoring and reports - added on server: new ANS event to notify a call on hold state - added on server: improved LCR carrier prefix settings page - added on server: exit number for SIP carrier (only with selected carriers, like Voicetrading) - added on server: three more pre-defined carrier categories (Gsm ISDN, Gsm SIP, 6017) - fixed on server: international prefix on SMS message sending is fixed (now can be edited) - fixed on server: no Provider Name in SMS report - fixed on server: in the advanced VoIP carrier section is not possible to edit the VoIP proxy field - fixed on server: an SMS message sent to mobile phone contains part of the previous SMS message - fixed on server: "Error: bad post parameters" on carrier modification - fixed on server: unable to export text messages on a text file - fixed on server: on text messages report, no items can be selected by sender or recipient - fixed on server: on IVR, script path field gets a wrong value updating from an previous version - fixed on server: when exporting call report items filtered by group, the filtering is lost and all items get exported - fixed on server: on SIP carrier properties sometimes prefix to be removed get lost - fixed on server: callednumber field of the INVITE SIP packet filled with user extension rather than real called number - fixed on server: DBcheck.exe (Database coherence check) is missing in the server setup - added on client: Vista 64 bit client compatibility - added on client: tandem device, make it possible to have two phones sharing the same credentials - added on client: call parking, a call can be stored by a user and retrieved by another user - fixed on client: a call answered by a group vocal box is not inserted in the call report - fixed on client: searching contacts by initial letter sometime fails - fixed on client: added contacts on a new group are shown with bad fonts - fixed on client: speed group icons aren't saved on server and are lost on re-login - fixed on client: the group info in the client panel when a call is received thru a group shows my number and not the group number - fixed on client: pressing "who called whom" for the second time, before the tab is showed, freezes the client - fixed on client: field "other" on contacts item contain wrong chars - fixed on client: some phrases are truncated on setting options form - fixed on client: calling thru SIP carrier, obtained a negative early connect, the call is terminated and other carriers not used - fixed on client: picking a call of a tandem user, the call is picked but the other phone ring - fixed on client: multiple recording during the same call, only one recording produced - fixed on fax : FAX page on landscape (horizontal) format looks squashed (please re-install from setup to fix this) Version 4.2.19 Platform & Pronto40/300 - fixed on server: wrong connected_number parameter on ANS call_answered event when user presses HOLD key before accepting call - fixed on server: after updating a user extension, groups are automatically updated but don't get saved - fixed on server: on group editing, the available users aren't sorted - fixed on client: a user is unable to resume from standby mode causing his group to skip the "on busy" event - fixed on fax: using landscape format leads to bad graphics - added on client: dual core processor support - added on client: new V-6014 USB phone support (Platform version only) - added on fax: new 64-bit fax driver allows installation on 64-bit operating system - added on client: separate volume control for each audio device Version 4.2.13 Platform & Pronto40/300 - fixed on server: external call prefix on user profile - fixed on server: fax through sip carrier - fixed on client: TRAN button on USB phone - fixed on client: when scheduling a new task year is always 2007 - fixed on client: on userarea call popup "other number" field is missing - fixed on client: when importing contact throug CSV file, "other number" field is missing Version 4.2.11 Platform & Pronto40/300 - added on server: IVR programming by service numbers - added on server: enable registration expire check (used on some SIP phone) - fixed on server: incoming calls number limit doesn't work - fixed on server: no broken tone when a user is busy or on pause - fixed on server: code registration outside Italy sometime doesn't work Version 4.2.9 Platform & Pronto40/300 - added on server: better fax service clock management leading to enhanced performances on sending and receiving. - added on server: enhanced status informations on fax sending and receiving - fixed on server: on IVR, after a message is listened and no action needed, call doesn't get disconnected - fixed on server: group activity statistics sometime are wrong, influencing group behaviour - fixed on server: calls cannot be filtered by "not answered" status - fixed on client: private contacts' name not displayed on calls list - fixed on client: sometime ringing doesn't stop after the call is answered - fixed on client: when a call is forwarded by the IVR, two Outlook Journal windows are opened - fixed on Wizard: SMTP password is visible - fixed on Wizard: deleting users/deleting loopback ISDN number error - fixed on Wizard: starting service after wizard completition gives error Version 4.2.5 Platform & Pronto40/300 - fixed on client: slow menu on Vista - fixed on client: text copying on web browser based windows - fixed on client: update can be done without administrative privileges - fixed on client: automatic upgrade could fail if Outlook integration enabled Version 4.2.4 Platform & Pronto40/300 - added on client: Vista Operating System is now supported (client and fax) Version 4.2.2 Platform & Pronto40/300 - added on server: number mappings using wild char - added on server: maximum incoming calls limit for each number - added on server: maximum queueable calls limit for each number - added on server: a way to bypass online check - added on server: IVR script run without user input - added on server: several audio source (file, http streaming, line-in) for IVR, music on hold and groups - added on client: searching on Exchange shared contacts - added on client: customizable ringings for each caller - added on client: user status icons managed in user groups Version 4.1.5 Platform & Pronto40/300 - fixed on Server: fax sending queue get blocked and no fax is sent anymore - fixed on Server: an intrusion call on hold is not muted anymore when back - fixed on Server: sending a sms thru task and executing now doesn't work - fixed on Server: mapped calls numbers aren't translated on callreport - fixed on Client: calling a phonebook contact without business number leads to error Version 4.1.4 Platform & Pronto40/300 - fixed on Server: IVR go back key doesn't work when selection key is saved - fixed on Server: problem on SIP protocol if multiple record_route - fixed on Server: group voice mail doesn't work - fixed on Server: editing IVR node description could lead to an error - fixed on Server: DDI calls cause bad entries on call report - fixed on Server: group profiles version 3.x import problems - fixed on Server: private phonebook items sometime are public - fixed on Server: a call to a group with many wan routes stops on first broken wan route - fixed on Server: network type on call report sometime is wrong - fixed on Server: problem on sms send using service cgi - fixed on Server: error on blind forward to a group where first member is diverted - fixed on Server: during a call to IVR forwarded to a group, if the caller closes, the call hangs - fixed on Client: intrusion window not shown even when explicitly set on configuration file. After hold, mike no more disabled Version 4.1.2 beta Platform & Pronto40/300 - fixed on Pronto/Platform: groups voicemail works only after server restart - fixed on Pronto/Platform: IVR node's go back key doesn't work when using keep entry key option - fixed on Pronto/Platform: bad multiple SIP record root header field - fixed on Pronto/Platform: fail to convert wave files on IVR nodes and groups - fixed on Pronto/Platform: wrong fax reception result when printer fails - fixed on Pronto/Platform: server reports 65000 users after deleting the last user - added on Pronto/Platform: vocalbox, divert, recall-on-busy, call picking, set user mode services extended to SIP phones - added on Client: scheduled tasks - added on Client: extended info on received calls concerning groups and call picking - added on Client: advanced text messages management - added on Client: hide/show panels option - added on Client: phone lock mode - added on Platform Client: auxiliar plug-in panel - added on Platform Client: alternative number resolution Version 4.0.5 Platform & Pronto40/300 - fixed on Pronto/Platform: on received/sent faxes lists daily items aren't showed - fixed on Pronto/Platform: unable to add phonebook items on a new installation - fixed on Pronto/Platform: fail to receive faxes when the selected printer fails - fixed on Pronto/Platform: groups wizard sets wrong username/password causing error - fixed on Platform: on-line check fails when maximum retries reached - fixed on Client: command voispeed:A{ID} fails Version 4.0.4 (beta) Platform & Pronto40/300 - fixed on Pronto/Platform: some pop-up menus have wrong chars or showed on unreacheable positions - fixed on Pronto/Platform: calls lists showed very slowly when many calls are present - fixed on Pronto/Platform: memory leakage after many SIP calls - fixed on Client: no ring on second incoming call - added on Pronto/Platform: improved performances on Database and memory management - KNOWN BUG on Pronto/Platform: on received/sent faxes lists daily items aren't showed (fix: select previous beginning day) Version 4.0.3 Platform & Pronto40/300 - fixed on Pronto/Platform: only daily faxes can be seen on sent/received report pages - fixed on Platform: group profiles are not saved - fixed on Pronto/Platform: having many vocal messages on multiple pages, some of them could be incorrectly indexed/listened. Deleting message won’t delete the relative wave file. - fixed on Pronto/Platform: enabling automatic calls recording on a single controller only incoming calls are recorded - fixed on Pronto/Platform: sometime an error occurs adding a user on a group - fixed on Client: when two remote clients share the same local IP address sometime their audio get mixed - fixed on Client: clicking the Call on Outlook button when no contact or a group is selected, an error window appear - fixed on Client: USB phone doesn’t work if client is installed on a Windows Server domain - added on Pronto/Platform: improved performances on SIP phone calls Version 4.0.2 Platform & Pronto40/300 - fixed on Pronto/Platform: on fax sending retry, if some pages have been sent, the notification mail is not delivered - fixed on Pronto/Platform: when entering an IVR node with timeout from last inserted digit, timer start when playng messages, causing early call termination - fixed on Pronto/Platform: sometime it’s impossible to modify phonebook contacts (“DB error”). The same error is caused when changing international settings. - fixed on Pronto/Platform: registration timeout issue with some SIP peripherals - fixed on Pronto/Platform/Client: old link in auto-start Windows folder are deleted when installing from Setup - fixed on Client: cancelling divert number input box, client remain on divert - fixed on Client: after clean installing version 4.0.0 or 4.0.1 the configuration file is bad and local settings saving is not allowed - fixed on Client: after listening a vocal box message, this is not checked as listened - fixed on Client: old client is not allowed to call a Outlook contact with the + prefix - fixed on Client: USB phone random crash - fixed on Client: vocalbox listening is broken on old client - fixed on Client: voispeed:XXX command is broken on old client - added on Client: better call report visualization with the ability of previous and next page changing - added on Client: better phonebook contacts visualization with sharing info and editing icons - added on Client: user password changing from client itself - added on Client: diagnostic window - added on Client: users auto detect and add - added on Client: multiple text message sending, through multiple users selection Version 4.0.1 Platform & Pronto40/300 - fixed on Pronto: call recording on every calls - fixed on Pronto: remote IP address on LAN interface (for remote clients) is not saved when changed - fixed on Pronto/Platform Setup: when upgrading from VOIspeed PBX the previous installation directory is not mantained - fixed on Client: event call_accept and call_busy missed. “Execute thru shell” option is lost - fixed on Client: after upgrading from VOIspeed PBX, the voispeed:{number} protocol doesn’t work anymore on client side - fixed on Client: Integra and Outlook settings are wrong when set from the administrator side - added on Pronto/Platform: fax sender user showed in the call report - added on Pronto/Platform: contacts import from .csv text file to server shared phonebook |